C-LLT213C offers video, audio & power to and from CAT-5 twisted pair cabling. It has two sets of simple connections. The first is a BNC video, RCA audio and a 2.1mm Male Power Plug (DVR End). The second is a RJ-45 connector for the CAT-5 twisted pair connection. The circuitry is passive so there is no need for a power supply. This balun allows a Digital Video Recorder (DVR) to be located an extended distance from the cameras and microphones being connected to it. Doing so with conventional audio video & power cabling is both expensive and prone to signal degradation. By using this device and a run of CAT-5 the problem can be solved inexpensively and without signal loss and the introduction of noise. In addition, in today’s retrofit market an installer cannot always successfully run a wire from point A to point B. There exists however an abundance of twisted pair cabling in many homes. By using a pair of these baluns with an existing wire an installer may be able to complete a job that he otherwise could not. This balun is best used in pairs or with C-LLT213G & C-LLT213B.

Key Specifications/Special Features:

• Single channel passive video, audio & power balun

Video:

• Frequency response: DC-6Mhz
• Common-mode/differential-mode rejection: 15kHz to 6MHz 60dB typ.

Impedance:

• BNC 75 Ohms
• UTP, RJ-45 connector: 100 Ohms

Wire Type:

• Specification: 24AWG UTP CAT-5
• DC loop resistance: 18 Ohms/100M
• Differential Capacitance: 62pF/m max

Power: Not required

Mechanical:

• Dimensions: 1.7"(H) x .8"(W) x .8"(L)
• Weight: 35g // 0.08lbs

Environment:

• Temperature: 0 to 50 degrees Celsius
• Humidity: 0 to 95%